FTTx – Solutions for optical fibre networks – infrastructure solutions from one source

Central office optical distribution frame (CO-ODF) EK 575

• Assembly frame made of aluminium containing the splice and patch sub-rack assemblies
• Cable routing via the cable risers and the channels in the base
• Housing dimensions WxHxD ETSI:   530 x 122 x 280 mm
• Number of splice cassettes:  48 for a total of 96 splices (expandable up to 54)
• Suitable for SC, LC and E2000 adaptors/pigtails
• Cable entry (patch cables/pigtails) without threading
• Pairing of splice and patch assemblies, handling up to 96 connections
• Modular expansion options for both patch and splice assemblies

View more

Optical distribution cabinet EK 245 L 2.6

The fibre distribution cabinet EK245 L 2.6 is a veritable all-rounder in our product range.
Installation is simple, as the two separate areas for optical fibre trays and the micro-ducts are extremely easily accessible. The inside of the door contains the fibre trays for the single and multiple fibre management system for distributing and storing the optical fibres connected from the central office to the networked buildings. Inside the FDC Cabinet is the management system for the distribution micro-ducts (egress to the customers) as well as the organised stowage space and strain relief for the central office feeder cables or micro-ducts.

• Installation of optical fibre technology into proven outdoor cabinets
• Separated working space for splice and micropipe management
• Assembly-friendly operation of optical fibre cables/micropipes
• Ready for GPON and P-t-P applications
• Populated with 144 single fibre cassettes or 72 multi-fibre cassettes

View more

Optical distribution cabinet EK430 M 2.6

The extremely compact design of the fibre distribution cabinet EK430 M 2.6 simply sets it apart.
It was developed as a cost-optimised solution for situations with limited space to provide fast optical
fibre connections in residential areas.

The outgoing distribution micro-ducts are held securely in the combination of base plate, Duo clamps and strain relief lugs.
They are either designed for Ø 7 / 10 mm or Ø 12 mm. The included insertion and mounting aid enables the micro-ducts to be installed quickly and easily.

The outgoing distribution micro cables can be ideally inserted, as the micro-ducts can be easily removed from the Duo clamps and so guarantee simple access for the fibre blowing process. Optical fibre cables in micro-ducts as well as burried cables can be inserted and held in the fibre distribution cabinet in the feeder section on the left. Just above this is an option to store excess lengths of unused or uncut bundled loose tube fibres (loop function).

• Micro-pipe/cable inlet with fastener and strain relief for 4x optical fibre cables/micro-pipes Ø 6.5–20 mm
• Possible looping and stowage of uncut cables/stowage of excess length of at least 6 m
• Mounting panel equipped with organiser module to accommodate E&MMS cassette system
• Cassette slots for up to 72 E&MMS splice cassettes (5 mm) (maximum of 864 splices) or up to 36 splice cassettes (10 mm)
• Micro cable organiser for different diameters:
  – 1.3 mm
  – 1.8 mm
  – 2.5 mm
  – 2.8–3.0 mm
  – 3.5 mm
  – 3.8–4.0 mm
  – NEW: 2.5 – 4.0 mm
• Micro-pipe capacity for 48×7 mm or 10 mm as well as 48×10 mm or 12 mm using Duo clamp sorting
• Micro-pipe management system with fixing straps for tool-free sorting and fastening of the outgoing micro-pipes

View more

Optical distribution cabinet EK30 S 2.6

The EK30 S 2.6 was designed for use in suburbs and rural areas in which the network connection of single-family homes and multi-family homes is primarily planned. The fibre distribution cabinet is designed for 24 micro-ducts with a diameter of 7 mm, 10 mm or 12 mm.
DUO clamps and DUO fixing lugs can be used to accommodate a mixture of diameters.
The outgoing micro-ducts are held securely in the combination of base plate, Duo clamps
and strain relief lugs. They are either designed for Ø 7/10 mm or Ø 12 mm.

The insertion and mounting aid enables the micro-ducts to be installed quickly and easily.
The outgoing micro cables can be ideally inserted, as the micro-ducts can be easily removed
from the Duo clamps and so guarantee simple access for the fibre blowing process. Optical
fibre cables in micro-ducts as well as burried cables can be inserted and held in the fibre
distribution cabinet in the feeder section on the left. Just above this is an option to store
excess lengths of unused or uncut bundled loose tube fibres (loop function).
The FDC EK30 S 2.6 meets the criteria of Germany’s National Broadband Funding Programme.

• Micro-pipe/cable inlet with fastener and strain relief for 4x optical fibre cables/micro-pipes Ø 6.5–20 mm
• Possible looping and stowage of uncut cables/stowage of excess length of at least 6 m
• Mounting panel equipped with organiser module to accommodate E&MMS cassette system
• Cassette slots for up to 36 E&MMS splice cassettes (5 mm) (maximum of 432 splices) or up to 18 splice cassettes (10 mm)
• Micro cable organiser for different diameters:
  – 1.3 mm
  – 1.8 mm
  – 2.5 mm
  – 2.8–3.0 mm
  – 3.5 mm
  – 3.8–4.0 mm
  – NEW: 2.5 – 4.0 mm
• Micro-pipe capacity for 24 x 7 mm or 10 mm as well as 24×12 mm using Duo clamp sorting
• Micro-pipe management system with fixing straps for tool-free sorting and fastening of the outgoing micro-pipes

View more

Underground distribution system EK 478, EK 338, EK 508, EK 428

• Underground distribution point for optical fibre with telescopic arm and bracket for typically available closures
• Clear dimensions of 400 x 1165, 550 x 1165, 800 x 1165, 800 x 1400 mm
• Different types of closure brackets are available for a wide variety of available closures
• Four-piece manhole cover for one-man operation
• For further information please refer to our FTTH + FTTB solution catalogue for optical fibre networks

View more

Telescopic arm with tilt and swivel function plus bracket

• For installation to the crossbar in the manhole
• Closure bracket with individual adapters

View more

Telescopic arm with tilt function plus bracket

• For installaton to the manhole wall
• Closure bracket with individual adapters

View more

Single line building cable entry system EK 459 VarioPipe

• Suitable for all wall thicknesses from 200 mm
• Non-foamed type for house walls and pour-and-set foam type for buildings with or w/o basement
• The system is installed in a hole of Ø 25 – 26 mm; the micropipes can be laid directly in the hole
• Filling with one media cable Ø 6 – 13 mm (micropipe, cable, oval cable 4/8) or 2x Ø 7 mm
• Horizontal or inclined installation up to 45°(continuous)
• Gas- and water-pressure-tight up to 1 bar, DIN 18533 W1.1-E, W1.2-E, W2.1-E
• No restoration of the building sealing to DIN 18533 necessary

View more

Optical fibre distribution and subscriber termination device EK 660 mini

• Multifunctional optical fibre building entry point, individually configurable as a net-work layer 3
  (NE3) termination box and/or subscriber connection network layer 4 (NE4)subscriber terminatio box
• Ø 5, 7 and 10 mm cable/micropipe inlet/outlet
• Integrated mounting area for fibre management and optical adapter/splice protection management
• Slot for 3+1 LC duplex optical adapters
• Accommodates strain relief for micropipes
• Installation/commissioning/service without special tools
• Various locking mechanism options available for the housing, as well as additional lead-sealing option
• W x H x D: 94 x 130 x 25 mm

View more

Optical fibre distribution and termination device EK 440 compact

• Left or right cable/micropipe ports with a diameter of 5, 7, 10 or 12 mm can be freely chosen
• Removable mounting panel for fibre and adaptor/splice protection management
• Slot for 6 adaptors
• Accommodates commercially available gas stops for micropipes
• Installation/commissioning/service without special tools
• W x H x D:  163 x 242 x 46 mm

View more

Optical fibre distribution and termination device EK 330

• Top or bottom cable/micropipe ports with a diameter of 5, 7, 10 or 12 mm can be freely chosen
• A pivoting installation plate supports fibre management for different applications
• Accommodates commercially available gas stops for micropipes
• Easy expansion for adaptors and pigtails, supported by an individual 6-part adaptor guide with set break points
• Removable splice cassette for splicing fibres
• W x H x D:  160 x 285 x 46 mm

View more